To start the OPC UA components when the controller starts up you need to add an additional process to INI file systemconfiguration.ini. Next startup the controller in service mode without HMI: When the SINUMERIK screen is displayed during startup and the PCU base version at the bottom right, press key '3' and log in as user auduser. Important note: Please ensure that the date and time on your HMI is correct, otherwise certificate based OPC UA authentication does not work! Make sure that you have option "Access MyMachine /OPC UA 6FC5800-0AP67-0YB0" activated (Startup->Licenses).Įnable the OPC UA communication port (TCP port 4840) by clicking button in area "Startup -> Network ->Company network". To read/write data from/to machines with Sinumerik 828D and 840D controllers connected to CNCnetPDM with your applications you can use our free Open Source Client (C-Sharp).Writing and changing of parameters is also included.
DOWNLOAD SINUTRAIN DRIVER
Our OPC UA Device Driver for Sinumerik 828D & 840D controllers enables constant monitoring of your machines with a Windows Background Service.Note: For software Operate version 4.7 see Sinumerik 840D 828D OPC UA (SW 4.7). Instructions on OPC UA setup and test with free SINUTRAIN versions are also included. This document describes setup and configuration of OPC UA components on controllers with software Operate 4.5 SP3 and communication with a remote PC. It also allows to write and change a wide range of parameters on these devices.ĭOWNLOAD SOFTWARE | CONTROLLER SETUP (REAL DEVICE) | CONTROLLER SETUP (SINUTRAIN) | SOFTWARE SETUP & USAGE (PC) | CNCnetPDM OPC UA CLIENT | CNCnetPDM OPC UA SIMPLE CLIENT | TROUBLESHOOTING CNCnetPDM OPC UA for Siemens Sinumerik Operate version 4.5 enables you to monitor machine-, process- and quality-data from Sinumerik 840D SL & 828D controllers from a remote PC.